3D-printed fuel assembly component installed in Swedish reactor

Jiří Puchnar
Jiří Puchnar
24 September 2022, 08:39
3D-printed fuel assembly component installed in Swedish reactor

Framatome has completed the installation of the first 3D-printed stainless steel fuel component in a reactor at the Forsmark nuclear power plant, operated by Swedish company Vattenfall. In cooperation with German pump and valve manufacturer KSB, Atrium 11 upper tie plate grids were designed, manufactured and installed in Unit 3 at Forsmark for a multi-year material irradiation program.

The upper tie plate grid, located at the top of the Atrium 11 fuel assembly, is a non-structural support component that holds the fuel rods in the required position and catches larger pieces of foreign material to prevent them from entering the fuel assembly from above. The upper tie plate grids can be readily inspected, and samples are available to assess the new manufacturing process in a power reactor.

In the conventional manufacturing process, upper tie plate grids are laser-welded using stamped comb plates, which require additional manufacturing steps and operator supervision.

Translation disclaimer

This article is a machine translation of the Czech original and has not yet been fully reviewed. In case of any doubt, please refer to the Czech version.

The article continues for subscribers

Premium content

The rest of this article is available to premium subscribers only. Get access to all premium articles on oEnergetice.cz.

You have read only 49% of the article — unlock the remaining 51% with a premium subscription.

Best value: annual subscription

Monthly option 4 € / month

3.25 €/ month

I already have a subscription